This is a newly built custom VESC based one wheel board. It is working, configured, and complete. This board configuration is a loose copy of my prior trail board. The configuration is what I personally call “The Edgewood”. The build itself uses tested parts, and are assembled cleanly with attention to sealing and soundness.
My most recent range test gave me approximately 28 miles out of this configuration. (18-22mph, 185lb rider weight).
The board includes a matched 4 amp charger and a board stand.
NOTE: As with most Thor400 builds I’ve done, there is a slight tail light flicker when moving the motor during idle. This flicker goes away when riding.
Specifications:
Front Box:
Fungineers Thor400 VESC in Cast Fungineers Box
Fungineers 12v High Beam Headlight
Rear Box:
19s2p 80v 10Ah Custom PCB Battery Pack (RS50 Cells) (684Wh)
ENNOID XLITE V4 Smart VESC-Connected BMS
TFL TORque Box 2
Custom Milled CNC Lid
12v RGB Taillight
Power Cable is custom made to suit the board, using Carve Workshop 15-Core cable stock.
Motor:
Fungineers Superflux 5” High Speed
TFL BTG Pioneer Tire, Soft Compound
TFL Cold Blocks, Funmetal Grey
Chassis:
TFL BTG WTF Varials Rails in Funmetal Grey & Gold
TORque Box 2 Compatible BANG Bumpers
Custom Printed “Extra Medium” footpads (printed in rigid PET-CF) with a Stoked Stock V3 sensor; Front footpad has clear window for status LEDs
Foam Grip Tape, cut to fit. Front grip foam edge sealed with silicone to prevent moisture wicking to the sensor
Printed half fenders (printed in tough PAHT-CF), compatible with tire side foot hold wings.
This is a newly built custom VESC based one wheel board. It is working, configured, and complete. This board configuration is a loose copy of my prior trail board. The configuration is what I personally call “The Edgewood”. The build itself uses tested parts, and are assembled cleanly with attention to sealing and soundness.
My most recent range test gave me approximately 28 miles out of this configuration. (18-22mph, 185lb rider weight).
The board includes a matched 4 amp charger and a board stand.
NOTE: As with most Thor400 builds I’ve done, there is a slight tail light flicker when moving the motor during idle. This flicker goes away when riding.
Specifications:
Front Box:
Fungineers Thor400 VESC in Cast Fungineers Box
Fungineers 12v High Beam Headlight
Rear Box:
19s2p 80v 10Ah Custom PCB Battery Pack (RS50 Cells) (684Wh)
ENNOID XLITE V4 Smart VESC-Connected BMS
TFL TORque Box 2
Custom Milled CNC Lid
12v RGB Taillight
Power Cable is custom made to suit the board, using Carve Workshop 15-Core cable stock.
Motor:
Fungineers Superflux 5” High Speed
TFL BTG Pioneer Tire, Soft Compound
TFL Cold Blocks, Funmetal Grey
Chassis:
TFL BTG WTF Varials Rails in Funmetal Grey & Gold
TORque Box 2 Compatible BANG Bumpers
Custom Printed “Extra Medium” footpads (printed in rigid PET-CF) with a Stoked Stock V3 sensor; Front footpad has clear window for status LEDs
Foam Grip Tape, cut to fit. Front grip foam edge sealed with silicone to prevent moisture wicking to the sensor
Printed half fenders (printed in tough PAHT-CF), compatible with tire side foot hold wings.