20s2p Regular (P28A Cells) Custom Battery for VESC Onewheel
This product page is for the battery pack itself, and DOES NOT INCLUDE the BMS. See the information below regarding where to source the BMS units.
Lead time is approximately 3 weeks.
This is a custom built lithium ion battery pack, for use in DIY rebuilds and from-scratch builds on the Onewheel XR or Fungineers’ Funwheel ST platforms. The configuration is 20s2p, using the Molicel P28A cell (size 18650). This pack fits the stock Onewheel XR battery box, as well as the standard size Funwheel ST battery box.
It can be wired for either the ENNOID XLITE V3 24S BMS, the Z Battery Solutions’ ZBMS, or the Fungineers BMS. You must choose one when adding this to your cart.
**ENNOID XLITE wiring includes temperature sensors installed in the pack.**
This product page is for the battery pack itself, and DOES NOT INCLUDE the BMS. See the information below regarding where to source the BMS units.
Lead time is approximately 3 weeks.
This is a custom built lithium ion battery pack, for use in DIY rebuilds and from-scratch builds on the Onewheel XR or Fungineers’ Funwheel ST platforms. The configuration is 20s2p, using the Molicel P28A cell (size 18650). This pack fits the stock Onewheel XR battery box, as well as the standard size Funwheel ST battery box.
It can be wired for either the ENNOID XLITE V3 24S BMS, the Z Battery Solutions’ ZBMS, or the Fungineers BMS. You must choose one when adding this to your cart.
**ENNOID XLITE wiring includes temperature sensors installed in the pack.**
This product page is for the battery pack itself, and DOES NOT INCLUDE the BMS. See the information below regarding where to source the BMS units.
Lead time is approximately 3 weeks.
This is a custom built lithium ion battery pack, for use in DIY rebuilds and from-scratch builds on the Onewheel XR or Fungineers’ Funwheel ST platforms. The configuration is 20s2p, using the Molicel P28A cell (size 18650). This pack fits the stock Onewheel XR battery box, as well as the standard size Funwheel ST battery box.
It can be wired for either the ENNOID XLITE V3 24S BMS, the Z Battery Solutions’ ZBMS, or the Fungineers BMS. You must choose one when adding this to your cart.
**ENNOID XLITE wiring includes temperature sensors installed in the pack.**
Battery Pack Specifications:
20s2p - Molicel P28A Cells
84V Fully Charged - 72V Nominal - 60V Recommended Low Voltage Tiltback
5.6Ah Nominal Capacity
403Wh Nominal Energy
Choose either XT60H or XT90S connector.
This battery pack can be seen in the build log article published here.
The battery can be wired for use with either the:
The ZBMS from Z Battery Solutions
or
or