20s2p GT ME4T Pack (50S Cells) Custom Battery for VESC Onewheel Builds & Conversions

from $619.99
sold out

This product page is for the battery pack itself, and DOES NOT INCLUDE the BMS. See the information below regarding where to source the BMS units.

This pack fits the stock Onewheel GT battery box.

INSTALLATION GUIDANCE & INFORMATION ARTICLE:
https://theboardgarage.com/articles/gt-me4t-installation-guidance

This is a custom built lithium ion battery pack, for use in DIY rebuilds and from-scratch builds on the Onewheel GT platform. The configuration is 20s2p, using the Samsung 50S cell (size 21700).

ALL CONNECTORS ARE WIRED WITH STANDARD POLARITY. ALWAYS DOUBLE CHECK POLARITY BEFORE PLUGGING IN POWER SOURCES.

“ME4T” comes from the batch/date code originally found on the cells, as shown in the photo. However, recent batch codes are different. The name ME4T remains as a naming convention.

Lead time is approximately 3 weeks.

It can be wired for either the ENNOID XLITE V3 BMS, the Z Battery Solutions’ ZBMS, or the Fungineers’ BMS, all of which fit the larger rear space afforded by the GT’s battery box. You must choose one when adding this to your cart.

**ENNOID XLITE wiring includes temperature sensors installed in the pack.**

Add BMS?:
Add To Cart

This product page is for the battery pack itself, and DOES NOT INCLUDE the BMS. See the information below regarding where to source the BMS units.

This pack fits the stock Onewheel GT battery box.

INSTALLATION GUIDANCE & INFORMATION ARTICLE:
https://theboardgarage.com/articles/gt-me4t-installation-guidance

This is a custom built lithium ion battery pack, for use in DIY rebuilds and from-scratch builds on the Onewheel GT platform. The configuration is 20s2p, using the Samsung 50S cell (size 21700).

ALL CONNECTORS ARE WIRED WITH STANDARD POLARITY. ALWAYS DOUBLE CHECK POLARITY BEFORE PLUGGING IN POWER SOURCES.

“ME4T” comes from the batch/date code originally found on the cells, as shown in the photo. However, recent batch codes are different. The name ME4T remains as a naming convention.

Lead time is approximately 3 weeks.

It can be wired for either the ENNOID XLITE V3 BMS, the Z Battery Solutions’ ZBMS, or the Fungineers’ BMS, all of which fit the larger rear space afforded by the GT’s battery box. You must choose one when adding this to your cart.

**ENNOID XLITE wiring includes temperature sensors installed in the pack.**

This product page is for the battery pack itself, and DOES NOT INCLUDE the BMS. See the information below regarding where to source the BMS units.

This pack fits the stock Onewheel GT battery box.

INSTALLATION GUIDANCE & INFORMATION ARTICLE:
https://theboardgarage.com/articles/gt-me4t-installation-guidance

This is a custom built lithium ion battery pack, for use in DIY rebuilds and from-scratch builds on the Onewheel GT platform. The configuration is 20s2p, using the Samsung 50S cell (size 21700).

ALL CONNECTORS ARE WIRED WITH STANDARD POLARITY. ALWAYS DOUBLE CHECK POLARITY BEFORE PLUGGING IN POWER SOURCES.

“ME4T” comes from the batch/date code originally found on the cells, as shown in the photo. However, recent batch codes are different. The name ME4T remains as a naming convention.

Lead time is approximately 3 weeks.

It can be wired for either the ENNOID XLITE V3 BMS, the Z Battery Solutions’ ZBMS, or the Fungineers’ BMS, all of which fit the larger rear space afforded by the GT’s battery box. You must choose one when adding this to your cart.

**ENNOID XLITE wiring includes temperature sensors installed in the pack.**

Battery Pack Specifications:

  • 20s2p - Samsung 50S Cells

  • 84V Fully Charged - 72V Nominal - 60V Recommended Low Voltage Tiltback

  • 10Ah Nominal Capacity

  • 720Wh Nominal Energy

  • XT60H Connector (STANDARD POLARITY)

The battery can be wired for use with either the:

ENNOID XLITE V3

Z Battery ZBMS

Fungineers BMS