Fungineers X7 Ultra | Semi-Custom Board Assembly
If you’re looking for a Fungineers X7, but better, then this is one of them. This custom build is based off of the Funwheel X7 platform, with key changes and modifications aligned with how The Board Garage prefers to do assembly. The front complete enclosure box is wired up to suit all the parts, with wiring cut to length and properly terminated. The rear is using a TORque Box with the tried and true ME4T Pack battery and excellent ENNOID XLITE V4 BMS fully connected via CAN bus for full VESC Tool battery data readouts. The power cable is custom made from the 14-core Floatboxx all inclusive cabling, fully sealed between cable glands. The charge port is fused for protection. All motor bolts are checked and threadlocked, all external screws are standard XR spec. Float Life BANG bumpers installed, and our own custom footpads, The Extra Mediums, are also installed for a natural comfortable ride feel.
This board is configured and set up with the in-house “Mediocre Medium” tune profile, that gives you the illusion of an XR ride feel, but without the weakness at the motor. Lastly, a remote for remote tilt is already installed and configured, for when you want to take this board off-road or along any steep inclines or declines.
This is a full featured VESC board, ready to ride. Charger and board stand included.
RAILS CAN BE CUSTOM ENGRAVED FOR ADDITIONAL FEE:
https://theboardgarage.com/store/p/onewheel-rail-custom-laser-engraving-add-on
If you’re looking for a Fungineers X7, but better, then this is one of them. This custom build is based off of the Funwheel X7 platform, with key changes and modifications aligned with how The Board Garage prefers to do assembly. The front complete enclosure box is wired up to suit all the parts, with wiring cut to length and properly terminated. The rear is using a TORque Box with the tried and true ME4T Pack battery and excellent ENNOID XLITE V4 BMS fully connected via CAN bus for full VESC Tool battery data readouts. The power cable is custom made from the 14-core Floatboxx all inclusive cabling, fully sealed between cable glands. The charge port is fused for protection. All motor bolts are checked and threadlocked, all external screws are standard XR spec. Float Life BANG bumpers installed, and our own custom footpads, The Extra Mediums, are also installed for a natural comfortable ride feel.
This board is configured and set up with the in-house “Mediocre Medium” tune profile, that gives you the illusion of an XR ride feel, but without the weakness at the motor. Lastly, a remote for remote tilt is already installed and configured, for when you want to take this board off-road or along any steep inclines or declines.
This is a full featured VESC board, ready to ride. Charger and board stand included.
RAILS CAN BE CUSTOM ENGRAVED FOR ADDITIONAL FEE:
https://theboardgarage.com/store/p/onewheel-rail-custom-laser-engraving-add-on
If you’re looking for a Fungineers X7, but better, then this is one of them. This custom build is based off of the Funwheel X7 platform, with key changes and modifications aligned with how The Board Garage prefers to do assembly. The front complete enclosure box is wired up to suit all the parts, with wiring cut to length and properly terminated. The rear is using a TORque Box with the tried and true ME4T Pack battery and excellent ENNOID XLITE V4 BMS fully connected via CAN bus for full VESC Tool battery data readouts. The power cable is custom made from the 14-core Floatboxx all inclusive cabling, fully sealed between cable glands. The charge port is fused for protection. All motor bolts are checked and threadlocked, all external screws are standard XR spec. Float Life BANG bumpers installed, and our own custom footpads, The Extra Mediums, are also installed for a natural comfortable ride feel.
This board is configured and set up with the in-house “Mediocre Medium” tune profile, that gives you the illusion of an XR ride feel, but without the weakness at the motor. Lastly, a remote for remote tilt is already installed and configured, for when you want to take this board off-road or along any steep inclines or declines.
This is a full featured VESC board, ready to ride. Charger and board stand included.
RAILS CAN BE CUSTOM ENGRAVED FOR ADDITIONAL FEE:
https://theboardgarage.com/store/p/onewheel-rail-custom-laser-engraving-add-on
Full Parts Breakdown:
Fungineers X7 Rails in Dark Red
Fungineers Superflux Mk3 High Speed Motor
Fungineers Thor300 Complete Box
Charge port fuse added
LEDs checked & rewired
Proper wire management and retention done
Flipsky VX4 Tilt Remote
14-core Floatboxx Cable Harness
The Float Life TORque Box Battery Enclosure
Original ME4T Pack Battery (18s2p 50S)
ENNOID XLITE V4 VESC Connected Smart BMS
The Float Life BANG Bumpers in Matte Black
Shop Custom Extra Medium Footpads w/ Stoked Stock V4 Sensor Installed
75.6v 4a Charger
Board Stand Included
After Sales Service:
There is after-sales service offered with this board. As this is a custom assembly, photos and notes can be provided upon request. The build methods used for this board are consistent with the articles published on this site, as well as the content published on the shop’s YouTube channel (http://www.youtube.com/@theboardgarage)
For riders that simply want to have a board they can ride, the shop offers full after-sales service and repair in the event of failure or defects for 6 months after purchase. This covers the labor rates and parts that are needed for the repair. As per the Terms & Conditions of the shop (found at the banner at the top of the site), total liabilities will not exceed the value of the board. Should there be a parts failure within 6 months, the board may be sent in for diagnosis and repair. After the repair, it will be returned to the user in functional condition with the original shop configuration applied.
After the 6 month period, repairs will be offered on a parts cost basis, where the labor rate is covered by the shop, and the cost of parts are charged to the user.
THIS AFTER SALES SERVICE DOES NOT APPLY TO THE BOARD IF THE BOARD IS MODIFIED, “UPGRADED”, WATER DAMAGED, CRASHED AND PARTS ARE DESTROYED, OR THE BOARD IS SUBJECT TO ABUSIVE CONDITIONS (EITHER TEMPERATURE CONDITIONS THAT WOULD CAUSE FAILURE, OR PHYSICALLY/ELECTRICALLY ABUSIVE CONDITIONS).
THIS SHOP BELIEVES IN RIGHT TO REPAIR. RIGHT TO REPAIR DOES NOT EQUAL “RIGHT TO BREAK THE DEVICE AND HAVE IT FIXED FOR FREE”
IN ORDER FOR RIGHT TO REPAIR TO ACTUALLY WORK, THE USER HAS TO HAVE REASONABLE STANDARDS OF PERSONAL RESPONSIBILITY OF THE DEVICES THEY CHOOSE TO OWN AND WORK ON THEMSELVES.
Custom build electric skateboards are custom made, “DIY” style devices that are assembled from a combination of in-house produced and outside-sourced products and parts. The nature of these devices is inherently hazardous, as they are built of parts offered only as and to enthusiast hobbyist market users, and are not meant for widespread consumer electronics distribution. As a result of this, any part may fail due to manufacturing defects that are not detectible when the device is built, and may present themselves to the user during use. IT IS FOR THIS REASONS THAT ALL CUSTOM DEVICES AND ASSEMBLIES MUST BE TREATED WITH EXTREME CAUTION AT ALL TIMES, AND USED IN A WAY CONSISTENT WITH DANGEROUS EXTREME SPORTS EQUIPMENT AND EXPERIMENTAL POWER DEVICES. NEVER CHARGE DEVICES UNATTENDED OR OVERNIGHT. NEVER SUBECT DEVICES TO PHYSICAL, ENVIRONMENTAL, or ELECTRICAL ABUSE. DOING SO WILL VOID ANY AND ALL WARRANTY OF THE PARTS AND THE WORK OF ASSEMBLY. In commissioning and/or using a custom built board/assembly, you assume all risk and liability of its use, its charging, and the potential results of any component failing during use or otherwise. Custom boards/assemblies are warranted for their assembly work for a period of 6 months after purchase. During this time, defects in workmanship or parts will be serviced and repaired at no cost to the user. After 6 months, repairs are offered at the cost of the parts needed for the repair, with the labor rate covered by the shop.